Test with approved smoke detector smoke spray, replace battery.
Check and reset breaker panel. Reset any GFI outlets (usually located near water in the kitchen, bathrooms, utility rooms and garages). Check if outlet works by turning on a wall switch in the room. Also, please test the item that you are trying to use in several outlets to see if it’s the outlet or the electronic that is faulty.
DO NOT PUT YOUR HAND IN THE DISPOSAL. When the disposal is on, do you hear a buzz? If you do not hear a buzz, hit the reset button on the bottom of the disposal and test. If you do hear a buzz, turn off disposal and unplug from wall before checking for items stuck in the disposal.
Check thermostat on tank for proper temperature setting and check that thermostat is not set to “vacation”. Check and reset breaker on power panel. Check and reset the button next to the thermostat.
Check thermostat on tank and turn down.
Turn off water fixture, turn off water at supply line and notify PMI Prime Property Services immediately.
Plunge and test. Use professional drain products such as Draino, Liquid Plumber, etc...
Check thermostat to see if the batteries need to be replaced. Check that furnace covers are in properly. Check to see if there is a switch that looks like an ordinary light switch needing to be turned on. Did you pay or disconnect the utility?
Check thermostat to see if the batteries need to be replaced. Check for clogged or dirty filters. Check main breaker to make sure it hasn't been tripped.
Clean food out of bottom of dishwasher.
Make sure you aren’t running the garbage disposal while dishwasher is running.
Check that the thermostat in refrigerator is set correctly.
Remove all food and store in a cooler. Turn off refrigerator and allow it to defrost completely. Turn refrigerator back on. If it continues to leak, contact PMI Prime Property Services.